
Arthrosamid for Knee OA: A Long-Lasting, Non-Surgical Osteoarthritis Treatment
If you are looking for Arthrosamid in Canada, we offer injections for knee OA pain to help improve mobility and long-lasting pain relief.
Share via:

This article has been adapted from a presentation originally given by Jason ‘Jay’ Smith, a physiotherapist working at Grand River Sports Medicine, for the Kitchener Minor Hockey Association. This article focuses on load management. We will define the different types of loads, how to track them, and what to consider when adjusting them.
To define ACWR, we must first define an acute load and a chronic load. An acute load is a measured load over the course of one training session or day. A chronic load is a measured load over a longer time period with consistent training sessions. ACWR is the Acute to Chronic Workload Ratio, and it is a way of comparing how hard you’re working in your current session to how hard you’ve worked over the past four weeks (or however long the time period used in your chronic load measurement is). We don’t want you to spike above what your body has gotten accustomed to, because that is typically when injuries occur.
Physiotherapists use ACWR as a tool to monitor potential over-training and under-training so we can maximize performance and minimize injury. We recommend you use it too! To calculate, divide your acute load (the load in your current session) by your chronic load (the average of your loads for the past 4 weeks). We will delve into specifics about accurate calculating later in the article. Tim Gabbett and Francois Gazzano are primary researchers in workload management and will be referenced throughout this article. Gabbett says rapid spikes in load are the problem, while consistent training is the solution. This probably reminds you of what other trainers or peers have told you before, that you should increase your load weight over time and not all at once. Research has shown that ACWR can explain 53% of injury likelihood, meaning that variable alone can account for 50% of all injuries across a variety of sports. The other 47% is due to other factors, which we will elaborate on in this article.
Physical load, i.e. weight, is not the only load we consider. There are two types of loads, external and internal. External load is composed of physical weight, repetitions, sets, frequency, power output, and other factors shown on the slide. Internal load is more focused on your perceived exertion, how hard you feel like you’re working. Internal load is measured through heart rate, recovery questionnaires, and other factors shown on the slide. It is important to consider both types of loads because the same external load for two athletes can elicit very different internal loads.
Fans of the Toronto Raptors will be familiar with Kawhi Leonard. Kawhi Leonard popularized the term ‘load management’ with his trainer due to his recurrent knee injury that caused him to sit out many games. This was because they were trying to manage his load to keep him ready for playoffs and other important games. As physiotherapists, load management is an important part of our work with athletes, thus why we make management plans for the season and adjust accordingly. This is the Goldilocks Approach to load management, trying to find the load that is ‘just right’ to maintain your progression but prevent injury.
To elaborate on the Goldilocks Approach, we look back to Tim Gabbett’s research. In this diagram, you are meant to begin within the green rectangle. Adequate training loads are ideal, you get high fitness levels, decreased soft-tissue injury risk, and overall good performance. As previously stated, a high training load can lead to increased soft-tissue injury risk despite its high fitness level, which leads to poor performance. The part that most people neglect to mention is that low training loads are also not ideal! With a low training load, you get poor fitness and increased injury risk, resulting in poor performance once again. This is why the management plans are put in place and consistently adjusted, so we can stay within an adequate training load.
To go through evidence against low training loads, i.e. undertraining, we are taking from a variety of studies. In one study, VO2 max is used as a measure of cardiovascular fitness. Amateur athletes with a low VO2 max were six times more likely to be injured than amateur athletes with a higher VO2 max, showing that fitness is a critical factor to injury, regardless of skill level. In another study, the upper body strength and prolonged running ability of athletes was measured, and the athletes with lesser measurements had a 2 to 3 times higher injury risk. In a study on rugby players, players who had not done 18 weeks of training prior to their first injury were 9 times more susceptible to re-injury than players who had. These studies show that while ACWR is important, aerobic fitness, sprint ability, speed, and lower body strength are crucial factors in separating robust and fragile athletes. Tim Gabbett summarized the need for training well, stating “Wrapping players in cotton wool will not bring on-field success.”
The evidence for high training loads, i.e. overtraining, is abundant as well. The idea that high training will speed up results is incorrect and comes with a high risk of injury. In one study, a 60% or higher increase in load for handball players is associated with double the risk of shoulder injuries. In one of Gabbett’s studies, he demonstrates that a load increase of 15% or more within two weeks can increase injury risk by 50%. We will elaborate on safe increases in load to maximize performance and progression, but these ideas of overtraining and undertraining are an important basis for that knowledge.
We want to be aware of some training adaptation principles as we work to improve our skills in any given sport. You could train without knowing these, but as physiotherapists, we want you to be educated on your health, and we believe these principles are crucial to understanding why we must train harder to get better. The Progressive Overload principle states that load must exceed capacity gradually over time to improve performance, but if it exceeds capacity too greatly then tissue tolerance will be exceeded, and injury can occur. The Specific Adaptations to Imposed Demand (SAID) principle states that adaptations are specific to the tissues and systems being stressed by the load. This means that the load will only affect performance in the tissues being stressed, e.g. an upper body workout will not improve your leg strength. Wolff’s Law states that healthy bone will adapt to the loads imposed upon it. This occurs through remodelling, if increased load is applied then the bone will remodel to increase strength. The same occurs with decreased load applied to bone, any extra bone growth will diminish as it is no longer needed. This is why it is important to prepare your body for your sport by training in a manner as close to sport as possible. This ensures the right tissues are stressed and your progress isn’t lost.
As shown on the chart, RPE is measured on a scale of 1 to 10. 1 being minimum effort, 10 being maximum effort. RPE is personal, completely dependent on individual perception of their own exertion. When measuring acute load, you would use your RPE for one session. When measuring chronic load, you would average your RPE from each session in the last 4 weeks.
Here is an example of an ACWR calculation using RPE. Athletes 1 and 2 complete the same 90 minute practice. Athlete 1 rates the practice a 7/10 on the RPE scale. The acute load is the RPE multiplied by the length of practice, in minutes. Therefore, 630. Their chronic load was previously calculated to be 400. That means Athlete 1’s ACWR is 630 divided by 400, thus 1.58. Athlete 2 rates the practice a 5/10 on the RPE scale. This makes their acute load equal to 450. Their chronic load was previously calculated to be 475. Therefore, Athlete 2’s ACWR is 0.95.
Whose performance is better, Athlete 1 or 2? Using this chart from Gabbett’s research, we can find the sweet spot for good performance and low injury risk. This is generally from 0.8 to 1.3 ACWR. Over 1.5 is regarded as the injury risk zone for simplicity but keep in mind that underloading can also lead to injury. By these standards, Athlete 2 has better performance, but they are not maximizing their performance as they are not progressing in relation to their chronic load, they are staying within it. Athlete 1 is in the danger zone where their injury risk is heightened. Hopefully this has demonstrated how the same 90 minute practice can lead to different results depending on the individual.
What separates us from other athletes? There are many factors which we categorize into modifiable, non-modifiable, and others. These factors modulate our load capacity and influence how we perceive our training. Non-modifiable factors are simple, an athlete’s age, gender, anatomical differences (e.g. bone length, hormones, health conditions), or previous injuries. Modifiable factors can be controlled and modified through training. These include aerobic/cardio capacity, strength, neuromuscular control, mobility, and nutrition. Other factors are factors which affect the athlete’s wellbeing but aren’t completely dependent on fitness. These include mood, stress levels, sleep quality, and general muscle soreness. These other factors are harder to measure, so we as practitioners have monitoring systems in place for both us and the athletes to stay on top of their own wellbeing.
In the slide above, there is an example of a simple monitoring system for recovery. On the left, are the variables being monitored to measure one’s recovery and each can be rated from 1 to 5. 1 being the more negative side of the scale and 5 being the more recovered end. The recovering athlete is meant to go through and circle their rating for each, adding them all up in the end to be divided by 25 (the highest amount you can get). This, then multiplied by 100, gives you a percentage of how recovered the athlete is. This isn’t an exact science; it is meant to act more as a guide to how much you should be pushing yourself/your athlete. In the example above, you can see the red athlete is much less recovered than the blue athlete. To use this monitoring, you would give the red athlete a lesser training load to risk overtraining until their levels are higher.
How do we apply the RPE and ACWR numbers we discussed? Ideally, we would observe progressive overload from week to week. Research has shown that an increase of 1% to 9% per week increases fitness and capacity without increasing injury risk. Lower than 1%, you would risk undertraining and losing progress.
An important concept in fitness training is “the floor, the ceiling, and time”. The idea is that the floor represents the athlete’s current capacity level of fitness, and the ceiling is the capacity required to perform the specific activities of the sport or ideal level of fitness. It is possible to safely progress the athlete from the floor to the ceiling, as long as they are afforded enough time. This concept is in our minds as physiotherapists and health providers when we program training for you over the season.
This slide serves as a visual for the concept. There are different situations which may put distance between the floor and ceiling. Example A is the simple ideal. Example B may be if a competition is moved up to a sooner date. However, the slope of training is too steep. This isn’t attainable for the athlete without overtraining and risking injury. Example C would be if we started training earlier once we find out the competition is sooner than previously thought. This would allow for adequate and safe training. Example D shows how we could raise the floor with offseason training, thus making the ceiling closer during the season. Example E introduces the concept of “the basement”, a place lower than the floor that can be reached if we negate training and don’t maintain our fitness in between seasons. Going down to the basement can mean a more difficult season for athletes, which is why we recommend maintaining your progress. Example F is the goal of progressive overload. If we increase our general fitness, then it is much easier to reach the ceiling. By maintaining this routine, you eventually raise the floor and thus raise the ceiling, reaching “the penthouse” and being overprepared for the season. This is where we want our athletes to be for the season.
To finish off this article, we would like to take a closer look at the concepts discussed through the lens of ice hockey research. One study measured external load through accelerometers. Ice hockey players spend 39% of their time on the ice gliding on 2 feet, and 16% of their time striding to maintain speed. These manufacturers account for load in OIL (on-ice load) or OIL/min over 0.3m/s2 of acceleration, thus removing periods of lower activity in which athletes aren’t exerting themselves. That is how the NHL determines external load and programs training for their players based on ACWR. These accelerometers are costly, but they are not the only accurate method. Research has shown that RPE correlates highly with accelerometers’ external load measurements, specifically time spent above 85% of our maximum heart rate. One could argue RPE allows for higher individuality when assessing external load as it varies wildly between players, again due to the modifiable, non-modifiable, and other factors.
It is interesting to note how different player positions can result in different external loads. For example, defense players are measured to have more accelerations and decelerations than forwards. This can be explained by the reactionary component of defense, having to move quickly to intercept the moves of the forwards. However, the RPE per session between defense and forwards is similar, demonstrating how athletes adapt to the demands of their activity and the importance of practicing and training in a way that mimics your sport, so you can properly adapt. Finally, it has been documented that higher training loads and harder practices occur most frequently after a loss, after playing a top ranked opponent, before playing an away game, and before playing a weaker opponent. If you look at the bigger picture, these situations don’t correlate to a need for harder practice. This can be used as evidence of reactionary, emotional decision making. There is no need to punish athletes with harder practice after a loss or give into anxiety before an away match. We recommend using a more scientific approach to training, for yourselves and for your athletes, as coaches.
To summarize: if you stay ready, you don’t have to get ready! Make sure to stay fit and continue training even in the off season to maintain your progress. Remember to prioritize recovery, monitor it yourself and put your wellbeing first. If you have any questions, feel free to reach out to us on social media @GRSMCentre, or book an appointment.

Jay graduated from McMaster University in 2011 with a Masters of Physiotherapy. His previous education includes a Bachelor of Arts in Kinesiology in 2009 from Western University. Jason has obtained his FCAMPT (Fellow of the Canadian Academy of Manipulative Physiotherapy) designation. This designation is internationally recognized, and follows a comprehensive post-graduate training program that solidifies manual therapy skills, teaches advanced clinical reasoning, and allows him to perform spinal manipulation.

If you are looking for Arthrosamid in Canada, we offer injections for knee OA pain to help improve mobility and long-lasting pain relief.

Prepare for hockey season with expert hockey training tips. Learn hockey exercises for improving strength, mobility, conditioning, and injury prevention.

Wondering if your child needs pediatric physiotherapy? Learn 10 signs you shouldn’t ignore, from frequent falls and pain to balance and movement concerns.